- getAccessMode() - Method in enum com.unitech.lib.types.scanner.DeviceParamID
-
Gets the access mode of the device parameter.
- getAddress() - Method in class com.unitech.lib.detect.UnitechDevice
-
Get the address of the device.
- getAddress() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the address of the device associated with an instance of the BaseReader class.
- getBarcodeType() - Method in enum com.unitech.lib.types.scanner.BarcodeID
-
Gets the category of the barcode type.
- getBaseEngine() - Method in class com.unitech.lib.reader.BaseReader
-
Returns an instance of the BaseEngine class that defines the engine used by the Device.
- getCheckBatteryInterval() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the interval for checking the battery status.
- getCode() - Method in enum com.unitech.lib.types.AccessMode
-
Returns the integer code of the access mode.
- getCode() - Method in enum com.unitech.lib.types.BatteryState
-
Returns the byte code of the battery state.
- getCode() - Method in enum com.unitech.lib.types.ConnectState
-
Returns the integer code of the connection state.
- getCode() - Method in enum com.unitech.lib.types.ConnectType
-
Returns the integer code of the connection type.
- getCode() - Method in enum com.unitech.lib.types.DeviceType
-
Returns the integer code of the device type.
- getCode() - Method in enum com.unitech.lib.types.NotificationID
-
Returns the byte code of the notification.
- getCode() - Method in enum com.unitech.lib.types.ResultCode
-
Returns the integer code of the result code.
- getCode() - Method in enum com.unitech.lib.types.scanner.BarcodeID.BarcodeType
-
Gets the byte value of the category.
- getCode() - Method in enum com.unitech.lib.types.scanner.BarcodeID
-
Gets the integer value of the barcode type.
- getCode() - Method in enum com.unitech.lib.types.scanner.BeeperVolume
-
Gets the byte value of the volume level.
- getCode() - Method in enum com.unitech.lib.types.scanner.BeepIndicator
-
Gets the byte value of the beep indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.BluetoothSignalCheckingLevel
-
Gets the byte value of the level.
- getCode() - Method in enum com.unitech.lib.types.scanner.ConnectionIndicator
-
Gets the byte value of the connection indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.ControlCharacterFilter
-
Gets the byte value of the control character filter.
- getCode() - Method in enum com.unitech.lib.types.scanner.DataSendingInterBlock
-
Gets the byte value of the delay type.
- getCode() - Method in enum com.unitech.lib.types.scanner.DataTerminator
-
Gets the byte value of the data terminator.
- getCode() - Method in enum com.unitech.lib.types.scanner.DeviceParamID
-
Gets the integer value of the device parameter.
- getCode() - Method in enum com.unitech.lib.types.scanner.EngineModel.EngineVendor
-
Gets the integer value of the engine vendor.
- getCode() - Method in enum com.unitech.lib.types.scanner.EngineModel
-
Gets the integer value of the engine model.
- getCode() - Method in enum com.unitech.lib.types.scanner.EngineParamID
-
Gets the integer value of the engine parameter.
- getCode() - Method in enum com.unitech.lib.types.scanner.ErrorIndicator
-
Gets the byte value of the error indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.GoodReadIndicator
-
Gets the byte value of the good read indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.GS1AI
-
Gets the byte value of the GS1 Application Identifier.
- getCode() - Method in enum com.unitech.lib.types.scanner.HIDEncoding
-
Gets the byte value of the HID encoding.
- getCode() - Method in enum com.unitech.lib.types.scanner.HIDInterCharacter
-
Gets the byte value of the inter-character delay.
- getCode() - Method in enum com.unitech.lib.types.scanner.HIDKeyboardCase
-
Gets the byte value of the HID keyboard case.
- getCode() - Method in enum com.unitech.lib.types.scanner.HIDKeyboardLanguage
-
Gets the byte value of the HID keyboard language.
- getCode() - Method in enum com.unitech.lib.types.scanner.HIDUTF8Big5OutputType
-
Gets the byte value of the output type.
- getCode() - Method in enum com.unitech.lib.types.scanner.LEDIndicator
-
Gets the byte value of the LED indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.OperationMode
-
Gets the byte value of the operation mode.
- getCode() - Method in enum com.unitech.lib.types.scanner.ParamType
-
Gets the integer value of the parameter type.
- getCode() - Method in enum com.unitech.lib.types.scanner.PowerOffIndicator
-
Gets the byte value of the power off indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.PowerOnIndicator
-
Gets the byte value of the power on indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.SettingIndicator
-
Gets the byte value of the setting indicator.
- getCode() - Method in enum com.unitech.lib.types.scanner.VibratorIndicator
-
Returns the byte code of the vibrator indicator.
- getConnectState() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the connection status of the device with the instance of the BaseReader class.
- getConnectType() - Method in class com.unitech.lib.detect.UnitechDevice
-
Get the connection type.
- getConnectType() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the instance of BaseReader associated with device.
- getDefaultValue() - Method in class com.unitech.lib.model.scanner.DeviceParam
-
Get the default value of the parameter
- getDefaultValue() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Get the default value of the parameter.
- getDeviceName() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the name of the Device associated with an instance of the BaseReader class.
- getDeviceSupportedParameters(DeviceType) - Static method in class com.unitech.lib.reader.BarcodeReader
-
Get the supported parameters of the specified device model.
- getDeviceType() - Method in class com.unitech.lib.detect.UnitechDevice
-
Get the device type.
- getDeviceType() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the type of Device to which the instance is connected.
- getEngineModel() - Method in class com.unitech.lib.engine.BaseEngine
-
Returns the EngineModel of the engine.
- getEngineSupportedParameters(EngineModel) - Static method in class com.unitech.lib.reader.BarcodeReader
-
Get the supported parameters of the specified engine model.
- getId() - Method in class com.unitech.lib.model.scanner.DeviceParam
-
Gets the ID of the parameter.
- getId() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Gets the ID of the parameter.
- getLogLevel() - Static method in class com.unitech.lib.util.diagnotics.UniLogger
-
Gets the log level.
- getMaxValue() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Get the maximum value of the parameter.
- getMaxVersion() - Method in class com.unitech.lib.model.scanner.BaseParam
-
Returns the maximum version that supports the parameter.
- getMCUCommandID(boolean) - Method in enum com.unitech.lib.types.scanner.DeviceParamID
-
Gets the MCU command ID of the device parameter.
- getMessage() - Method in exception com.unitech.lib.diagnositics.ReaderException
-
Get the human-readable message describing the exception.
- getMinValue() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Get the minimum value of the parameter.
- getMinVersion() - Method in class com.unitech.lib.model.scanner.BaseParam
-
Returns the minimum version that supports the parameter.
- getName() - Method in class com.unitech.lib.detect.UnitechDevice
-
Get the name of the device.
- getOptions() - Method in class com.unitech.lib.model.scanner.DeviceParam
-
Get the options of the parameter
- getOptions() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Get a list of options for the parameter.
- getParameter(int, EngineParamID, IParameterEventListener) - Method in class com.unitech.lib.engine.BaseEngine
-
Get a specific engine parameter setting.
- getParameter(EngineParamID, IParameterEventListener) - Method in class com.unitech.lib.engine.BaseEngine
-
Get a specific engine parameter setting.
- getParameter(int, DeviceParamID, IParameterEventListener) - Method in class com.unitech.lib.reader.BarcodeReader
-
Get a specific device parameter setting.
- getParameter(DeviceParamID, IParameterEventListener) - Method in class com.unitech.lib.reader.BarcodeReader
-
Get a specific device parameter setting.
- getParameters(int, EngineParamID[], IParameterEventListener) - Method in class com.unitech.lib.engine.BaseEngine
-
Get multiple engine parameter settings.
- getParameters(EngineParamID[], IParameterEventListener) - Method in class com.unitech.lib.engine.BaseEngine
-
Get multiple engine parameter settings.
- getParameters(int, DeviceParamID[], IParameterEventListener) - Method in class com.unitech.lib.reader.BarcodeReader
-
Get multiple device parameter settings.
- getParameters(DeviceParamID[], IParameterEventListener) - Method in class com.unitech.lib.reader.BarcodeReader
-
Get multiple device parameter settings.
- getProtocol() - Method in class com.unitech.lib.reader.BaseReader
-
Returns an instance of the BaseProtocol class that defines the protocol used by the Device.
- getRawValue() - Method in class com.unitech.lib.model.scanner.DeviceParam
-
Get the value with raw byte array format
- getResultCode() - Method in exception com.unitech.lib.diagnositics.ReaderException
-
Get fault and motion results.
- getSerialNumber() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the serial number of the device.
- getStrVersion() - Method in class com.unitech.lib.engine.BaseEngine
-
Returns the version of the engine as a string.
- getSupportedParameterIds() - Method in class com.unitech.lib.engine.BaseEngine
-
Returns an array of EngineParamID objects that are supported by the engine.
- getSupportedParameterIds() - Method in class com.unitech.lib.reader.BarcodeReader
-
Gets the supported parameter IDs of the device.
- getSupportedParameters() - Method in class com.unitech.lib.engine.BaseEngine
-
Returns an array of EngineParam objects that are supported by the engine.
- getSupportedParameters() - Method in class com.unitech.lib.reader.BarcodeReader
-
Gets the supported parameters of the device.
- getTransport() - Method in class com.unitech.lib.reader.BaseReader
-
Returns an instance of the BaseTransport class that connects an instance of the BaseReader class
to the Device.
- getValue() - Method in class com.unitech.lib.model.scanner.DeviceParam
-
Get the value of the parameter
- getValue() - Method in class com.unitech.lib.model.scanner.EngineParam
-
Gets the value of the parameter.
- getVendor() - Method in enum com.unitech.lib.types.scanner.EngineModel
-
Gets the vendor of the engine model.
- getVersion() - Method in class com.unitech.lib.reader.BaseReader
-
Returns the firmware version of the device associated with the instance of the BaseReader class.
- goodRead - Variable in class com.unitech.lib.model.scanner.ScannerIndicator
-
- GoodReadIndicator - Enum in com.unitech.lib.types.scanner
-
The GoodReadIndicator enum represents different types of good read indicators.
- GS1AI - Enum in com.unitech.lib.types.scanner
-
The GS1AI enum represents different types of GS1 Application Identifiers.